Beschreibung
From the easy to print ABS+ company, here comes the PLA+ Silk dual color filament that is super easy to print! We have found that it prints better overhangs than most other brands, and comes out super smooth looking! This is not a transition filament. There is one color on one half of the filament strand, and another color on the other half.
Bambu AMS Compatible (Tested ourselves), it is manufactured to a consistent tolerance (+/- 0.02mm), you will experience consistent extrusion throughout the spool.
We recommend 60mm/s or slower on the outer wall to achieve that silky look!
Arrives in a cardboard box, wound on a plastic spool, vacuum sealed with a desiccant bag.
Print Settings: (The Bambu Studio/Orcaslicer PLA Silk default is a good starting point!)
| Attribute | Value (Recommended) |
| Extruder Temperature | 190c-220c (190c) |
| Heated Bed | 40c-60c (50c) |
| Heated Bed | Required For Most Build Surfaces |
| Build Surface | Any (PEI Textured) |
| Cooling Fan | 100% After Layer 1 |
| Build Volume Temperature | Room Temperature Recommended |