Beschreibung
Warum C3DP-Kits wählen? Sie werden in den USA zusammengebaut, der Abwärtswandler und der PI werden mit vorverlöteten Headern geliefert, der PI wird mit installierter Firmware geliefert und das Kit wird mit einer 6-monatigen DOA-Garantie geliefert!
Enthält KEINE gedruckten Teile.
Wird NICHT mit Carbon geliefert, als Option auswählen.
Jetzt mit CPAP-Schlauch!
Kontaktieren Sie uns, wenn Sie möchten, dass wir die Teile für Sie drucken.
Nicht auf Lager? Schauen Sie sich MandalaRoseworks hier an.
Dies gilt NUR für die aktualisierte Version von StealthMax! (Stand: 2. September 2024)
Stückliste:
| Beschreibung | Menge |
| DELTA BFB0712HF 65mm GPU-Lüfter | 1 |
| BME280 | 2 |
| SGP40 | 2 |
| Mateksys 6-30V MBEC6S Abwärtswandler | 1 |
| Raspberry Pi Pico W | 1 |
| M2x4 FHCS | 5 |
| M2x6 Selbstschneidend | 6 |
| M3x6 BHCS | 30 |
| M3x10 BHCS | 7 |
| M3x12 Innensechskant | 8 |
| M3x16 Innensechskant | 2 |
| M3x20 Innensechskant | 3 |
| M3x25 Innensechskant | 5 |
| M3xD5.0xL4.0 Heat Set-Einsätze | 30 |
| HEPA-Filter (für Xiaomi Mijia G1) | 2 |
| PC4-M10 Pneumatische Armatur | 1 |
| 250x3mm runde Acrylplatte | 1 |
| 3mm Schwammkordel | 1 Mio. |
| DC-Anschluss mit M8-Gewinde | 1 |
| JST-PH 4-poliger GPU-Lüfterstecker | 1 |
| 2 Fuß 26 AWG zusätzlicher Draht | 4 |
| 1/16" Schrumpfschlauch | 2 |
| 3/32" Schrumpfschlauch | 1 |
| 1/8" Schrumpfschlauch | 1 |
| 4-poliger 90-Grad-Header | 3 |
| 5-poliger 90-Grad-Header | 1 |
| DuPont Crimps | 40 |
| 4-poliges DuPont-Gehäuse | 5 |
| 5-poliges DuPont-Gehäuse | 1 |
| Micro-Fit 3-poliger Stecker mit Crimps | 1 |
| Micro-Fit 3-poliger Buchsenstecker mit Crimps | 1 |
| CPAP-Schläuche |
2 |
| 2020 M3 T-Mutter |
4 |
Das könnte Ihnen auch gefallen
Zuletzt angesehen
Customer Reviews
Order was packed with care. Parts were complete and labeled properly. GPU pin + and - ( black and red wires) was unfortunately flipped but it was easily repinned. This kit is well worth the price, even with the almost 100% markup due to exorbitant shipping fees to my country. Till our next transaction!
The kit appears to be high quality and should prove to be a great option to complete the project.
I've tried printing the Main Chamber multiple times and ran out of filament once, further attempts have failed due to my magnetic print surface peeling up with the print. I bought a G10 Garolite surface to fit my 305 mm Voron heat bed and I'm trying the print again. If this effort does not work I may need to try and find a pre-printed version of the Main Chamber. The main chamber uses a lot of filament and it fails 15 to 16 hours into the print each time so I have to switch to a new roll each time for fear of running out again.
No problems, good kit
Thank you for the 5 star review. We appreciate your business!
Arrived fast and packed well in the box. Everything labelled with amounts and all the screws, filters, and charcoal you need along with the needed electrical components from the BOM. Great kit for building this filter!
Awesome! Thanks for the great review and we're glad to hear that you're satisfied with the product!
Kit came nicely packaged and labeled, shipped quick and arrived quick, happy to buy from central 3d :)
Thank you for the 5 start review! We aim to provide 5 start service to our customers and are glad to hear that the kit arrived there quickly!